Investigation on vehicle occupant dummy applicability for under-foot impact loading conditions.

PURPOSE: Under-foot impact loadings can cause serious lower limb injuries in many activities, such as automobile collisions and underbody explosions to military vehicles. The present study aims to compare the biomechanical responses of the mainstream vehicle occupant dummies with the human body lower limb model and analyze their robustness and applicability for assessing lower limb injury risk in under-foot impact loading environments. METHODS: The Hybrid III model, the test device for human occupant restraint (THOR) model, and a hybrid human body model with the human active lower limb model were adopted for under-foot impact analysis regarding different impact velocities and initial lower limb postures. RESULTS: The results show that the 2 dummy models have larger peak tibial axial force and higher sensitivity to the impact velocities and initial postures than the human lower limb model. In particular, the Hybrid III dummy model presented extremely larger peak tibial axial forces than the human lower limb model. In the case of minimal difference in tibial axial force, Hybrid III's tibial axial force (7.5 kN) is still 312.5% that of human active lower limb's (2.4 kN). Even with closer peak tibial axial force values, the biomechanical response curve shapes of the THOR model show significant differences from the human lower limb model. CONCLUSION: Based on the present results, the Hybrid III dummy cannot be used to evaluate the lower limb injury risk in under-foot loading environments. In contrast, potential improvement in ankle biofidelity and related soft tissues of the THOR dummy can be implemented in the future for better applicability.

Prime editing using CRISPR-Cas12a and circular RNAs in human cells.

Genome editing with prime editors based on CRISPR-Cas9 is limited by the large size of the system and the requirement for a G/C-rich protospacer-adjacent motif (PAM) sequence. Here, we use the smaller Cas12a protein to develop four circular RNA-mediated prime editor (CPE) systems: nickase-dependent CPE (niCPE), nuclease-dependent CPE (nuCPE), split nickase-dependent CPE (sniCPE) and split nuclease-dependent CPE (snuCPE). CPE systems preferentially recognize T-rich genomic regions and possess a potential multiplexing capacity in comparison to corresponding Cas9-based systems. The efficiencies of the nuclease-based systems are up to 10.42%, whereas niCPE and sniCPE reach editing frequencies of up to 24.89% and 40.75% without positive selection in human cells, respectively. A derivative system, called one-sniCPE, combines all three RNA editing components under a single promoter. By arraying CRISPR RNAs for different targets in one circular RNA, we also demonstrate low-efficiency editing of up to four genes simultaneously with the nickase prime editors niCPE and sniCPE.

Discovery of deaminase functions by structure-based protein clustering.

The elucidation of protein function and its exploitation in bioengineering have greatly advanced the life sciences. Protein mining efforts generally rely on amino acid sequences rather than protein structures. We describe here the use of AlphaFold2 to predict and subsequently cluster an entire protein family based on predicted structure similarities. We selected deaminase proteins to analyze and identified many previously unknown properties. We were surprised to find that most proteins in the DddA-like clade were not double-stranded DNA deaminases. We engineered the smallest single-strand-specific cytidine deaminase, enabling efficient cytosine base editor (CBE) to be packaged into a single adeno-associated virus (AAV). Importantly, we profiled a deaminase from this clade that edits robustly in soybean plants, which previously was inaccessible to CBEs. These discovered deaminases, based on AI-assisted structural predictions, greatly expand the utility of base editors for therapeutic and agricultural applications.

Genome-edited powdery mildew resistance in wheat without growth penalties.

Disruption of susceptibility (S) genes in crops is an attractive breeding strategy for conferring disease resistance1,2. However, S genes are implicated in many essential biological functions and deletion of these genes typically results in undesired pleiotropic effects1. Loss-of-function mutations in one such S gene, Mildew resistance locus O (MLO), confers durable and broad-spectrum resistance to powdery mildew in various plant species2,3. However, mlo-associated resistance is also accompanied by growth penalties and yield losses3,4, thereby limiting its widespread use in agriculture. Here we describe Tamlo-R32, a mutant with a 304-kilobase pair targeted deletion in the MLO-B1 locus of wheat that retains crop growth and yields while conferring robust powdery mildew resistance. We show that this deletion results in an altered local chromatin landscape, leading to the ectopic activation of Tonoplast monosaccharide transporter 3 (TaTMT3B), and that this activation alleviates growth and yield penalties associated with MLO disruption. Notably, the function of TMT3 is conserved in other plant species such as Arabidopsis thaliana. Moreover, precision genome editing facilitates the rapid introduction of this mlo resistance allele (Tamlo-R32) into elite wheat varieties. This work demonstrates the ability to stack genetic changes to rescue growth defects caused by recessive alleles, which is critical for developing high-yielding crop varieties with robust and durable disease resistance.

Highly efficient genome editing in Xanthomonas oryzae pv. oryzae through repurposing the endogenous type I-C CRISPR-Cas system.

Efficient and modular genome editing technologies that manipulate the genome of bacterial pathogens will facilitate the study of pathogenesis mechanisms. However, such methods are yet to be established for Xanthomonas oryzae pv. oryzae (Xoo), the causal agent of rice bacterial blight. We identified a single type I-C CRISPR-Cas system in the Xoo genome and leveraged this endogenous defence system for high-efficiency genome editing in Xoo. Specifically, we developed plasmid components carrying a mini-CRISPR array, donor DNA, and a phage-derived recombination system to enable the efficient and programmable genome editing of precise deletions, insertions, base substitutions, and gene replacements. Furthermore, the type I-C CRISPR-Cas system of Xoo cleaves target DNA unidirectionally, and this can be harnessed to generate large genomic deletions up to 212 kb efficiently. Therefore, the genome-editing strategy we have developed can serve as an excellent tool for functional genomics of Xoo, and should also be applicable to other CRISPR-harbouring bacterial plant pathogens.

Genome editing in plants with MAD7 nuclease.

MAD7 is an engineered nuclease of the Class 2 type V-A CRISPR-Cas (Cas12a/Cpf1) family with a low level of homology to canonical Cas12a nucleases. It has been publicly released as a royalty-free nuclease for both academic and commercial use. Here, we demonstrate that the CRISPR-MAD7 system can be used for genome editing and recognizes T-rich PAM sequences (YTTN) in plants. Its editing efficiency in rice and wheat is comparable to that of the widely used CRISPR-LbCas12a system. We develop two variants, MAD7-RR and MAD7-RVR that increase the target range of MAD7, as well as an M-AFID (a MAD7-APOBEC fusion-induced deletion) system that creates predictable deletions from 5'-deaminated Cs to the MAD7-cleavage site. Moreover, we show that MAD7 can be used for multiplex gene editing and that it is effective in generating indels when combined with other CRISPR RNA orthologs. Using the CRISPR-MAD7 system, we have obtained regenerated mutant rice and wheat plants with up to 65.6% efficiency.

Genome-wide specificity of prime editors in plants.

Although prime editors (PEs) have the potential to facilitate precise genome editing in therapeutic, agricultural and research applications, their specificity has not been comprehensively evaluated. To provide a systematic assessment in plants, we first examined the mismatch tolerance of PEs in plant cells and found that the editing frequency was influenced by the number and location of mismatches in the primer binding site and spacer of the prime editing guide RNA (pegRNA). Assessing the activity of 12 pegRNAs at 179 predicted off-target sites, we detected only low frequencies of off-target edits (0.00~0.23%). Whole-genome sequencing of 29 PE-treated rice plants confirmed that PEs do not induce genome-wide pegRNA-independent off-target single-nucleotide variants or small insertions/deletions. We also show that ectopic expression of the Moloney murine leukemia virus reverse transcriptase as part of the PE does not change retrotransposon copy number or telomere structure or cause insertion of pegRNA or messenger RNA sequences into the genome.

High-efficiency prime editing with optimized, paired pegRNAs in plants.

Prime editing (PE) applications are limited by low editing efficiency. Here we show that designing prime binding sites with a melting temperature of 30 °C leads to optimal performance in rice and that using two prime editing guide (peg) RNAs in trans encoding the same edits substantially enhances PE efficiency. Together, these approaches boost PE efficiency from 2.9-fold to 17.4-fold. Optimal pegRNAs or pegRNA pairs can be designed with our web application, PlantPegDesigner.

Precise, predictable multi-nucleotide deletions in rice and wheat using APOBEC-Cas9.

Short insertions and deletions can be produced in plant genomes using CRISPR-Cas editors, but reliable production of larger deletions in specific target sites has proven difficult to achieve. We report the development of a series of APOBEC-Cas9 fusion-induced deletion systems (AFIDs) that combine Cas9 with human APOBEC3A (A3A), uracil DNA-glucosidase and apurinic or apyrimidinic site lyase. In rice and wheat, AFID-3 generated deletions from 5'-deaminated C bases to the Cas9-cleavage site. Approximately one-third of deletions produced using AFID-3 in rice and wheat protoplasts (30.2%) and regenerated plants (34.8%) were predictable. We show that eAFID-3, in which the A3A in AFID-3 is replaced with truncated APOBEC3B (A3Bctd), produced more uniform deletions from the preferred TC motif to the double-strand break. AFIDs could be applied to study regulatory regions and protein domains to improve crop plants.

SWISS: multiplexed orthogonal genome editing in plants with a Cas9 nickase and engineered CRISPR RNA scaffolds.

We describe here a CRISPR simultaneous and wide-editing induced by a single system (SWISS), in which RNA aptamers engineered in crRNA scaffold recruit their cognate binding proteins fused with cytidine deaminase and adenosine deaminase to Cas9 nickase target sites to generate multiplexed base editing. By using paired sgRNAs, SWISS can produce insertions/deletions in addition to base editing. Rice mutants are generated using the SWISS system with efficiencies of cytosine conversion of 25.5%, adenine conversion of 16.4%, indels of 52.7%, and simultaneous triple mutations of 7.3%. The SWISS system provides a powerful tool for multi-functional genome editing in plants.

Shortening the sgRNA-DNA interface enables SpCas9 and eSpCas9(1.1) to nick the target DNA strand.

The length of the sgRNA-DNA complementary sequence is a key factor influencing the cleavage activity of Streptococcus pyogenes Cas9 (SpCas9) and its variants. The detailed mechanism remains unknown. Here, based on in vitro cleavage assays and base editing analysis, we demonstrate that reducing the length of this complementary region can confer nickase activity on SpCas9 and eSpCas9(1.1). We also show that these nicks are made on the target DNA strand. These properties encouraged us to develop a dual-functional system that simultaneously carries out double-strand DNA cleavage and C-to-T base conversions at separate targets. This system provides a novel tool for achieving trait stacking in plants.

Fusing T5 exonuclease with Cas9 and Cas12a increases the frequency and size of deletion at target sites.

CRISPR/Cas systems, especially CRISPR/Cas9, generally result in small insertions/deletions, which are unlikely to eliminate the functions of regulatory and other non-coding sequences. To generate larger genomic deletions usually requires the use of pairs of guide RNAs. Here we show that it is possible to create such deletions with a single guide RNA by fusing Cas9 or Cas12a with T5 exonuclease (T5exo). These fusion constructs were found to increase both the frequency and size of deletions at target loci in rice protoplasts and seedlings. Moreover, the genome editing efficiencies of Cas9 and Cas12a were also enhanced by fusion with T5 exonuclease. These T5exo-Cas fusions expand the CRISPR toolbox, and facilitate knockout of regulatory and non-coding DNA sequences. From a wider standpoint, our results suggest a general strategy for producing larger deletions using other Cas nucleases.

Targeted, random mutagenesis of plant genes with dual cytosine and adenine base editors.

Targeted saturation mutagenesis of crop genes could be applied to produce genetic variants with improved agronomic performance. However, tools for directed evolution of plant genes, such as error-prone PCR or DNA shuffling, are limited1. We engineered five saturated targeted endogenous mutagenesis editors (STEMEs) that can generate de novo mutations and facilitate directed evolution of plant genes. In rice protoplasts, STEME-1 edited cytosine and adenine at the same target site with C > T efficiency up to 61.61% and simultaneous C > T and A > G efficiency up to 15.10%. STEME-NG, which incorporates the nickase Cas9-NG protospacer-adjacent motif variant, was used with 20 individual single guide RNAs in rice protoplasts to produce near-saturated mutagenesis (73.21%) for a 56-amino-acid portion of the rice acetyl-coenzyme A carboxylase (OsACC). We also applied STEME-1 and STEME-NG for directed evolution of the OsACC gene in rice and obtained herbicide resistance mutations. This set of two STEMEs will accelerate trait development and should work in any plants amenable to CRISPR-based editing.

Modulating chromatin accessibility by transactivation and targeting proximal dsgRNAs enhances Cas9 editing efficiency in vivo.

The CRISPR/Cas9 system is unable to edit all targetable genomic sites with full efficiency in vivo. We show that Cas9-mediated editing is more efficient in open chromatin regions than in closed chromatin regions in rice. A construct (Cas9-TV) formed by fusing a synthetic transcription activation domain to Cas9 edits target sites more efficiently, even in closed chromatin regions. Moreover, combining Cas9-TV with a proximally binding dead sgRNA (dsgRNA) further improves editing efficiency up to several folds. The use of Cas9-TV/dsgRNA thus provides a novel strategy for obtaining efficient genome editing in vivo, especially at nuclease-refractory target sites.

Genome editing for plant disease resistance: applications and perspectives.

Diseases severely affect crop yield and quality, thereby threatening global food security. Genetic improvement of plant disease resistance is essential for sustainable agriculture. Genome editing has been revolutionizing plant biology and biotechnology by enabling precise, targeted genome modifications. Editing provides new methods for genetic improvement of plant disease resistance and accelerates resistance breeding. Here, we first summarize the challenges for breeding resistant crops. Next, we focus on applications of genome editing technology in generating plants with resistance to bacterial, fungal and viral diseases. Finally, we discuss the potential of genome editing for breeding crops that present novel disease resistance in the future. This article is part of the theme issue 'Biotic signalling sheds light on smart pest management'.

Cytosine, but not adenine, base editors induce genome-wide off-target mutations in rice.

Cytosine and adenine base editors (CBEs and ABEs) are promising new tools for achieving the precise genetic changes required for disease treatment and trait improvement. However, genome-wide and unbiased analyses of their off-target effects in vivo are still lacking. Our whole-genome sequencing analysis of rice plants treated with the third-generation base editor (BE3), high-fidelity BE3 (HF1-BE3), or ABE revealed that BE3 and HF1-BE3, but not ABE, induce substantial genome-wide off-target mutations, which are mostly the C→T type of single-nucleotide variants (SNVs) and appear to be enriched in genic regions. Notably, treatment of rice with BE3 or HF1-BE3 in the absence of single-guide RNA also results in the rise of genome-wide SNVs. Thus, the base-editing unit of BE3 or HF1-BE3 needs to be optimized in order to attain high fidelity.

Postinvasive Bacterial Resistance Conferred by Open Stomata in Rice.

Stomata are leaf pores that regulate gas exchange and water transpiration in response to environmental cues. They also function in innate immunity by limiting pathogen entry through actively closing in so-called stomatal defense. However, roles of stomata in plant disease resistance are not fully elucidated, especially in monocots. Here, we report that non-race specific resistance of the rice abscisic acid-deficient mutant Osaba1 to Xanthomonas oryzae pv. oryzae is due to increased stomatal conductance. Reducing stomatal conductance in the Osaba1 mutant increases its susceptibility to X. oryzae pv. oryzae. Artificial opening of stomata in wild-type plants leads to enhanced resistance to X. oryzae pv. oryzae. The rice mutant es1-1 with constitutively higher stomatal conductance exhibits strong resistance to X. oryzae pv. oryzae. Additionally, Osaba1 and es1-1 are resistant to X. oryzae pv. oryzicola. The data support that open stomata confer postinvasive resistance against bacterial pathogens in rice, and such resistance probably results from decreased leaf water potential. Our findings reveal a novel role of stomata in plant immunity through modulation of leaf water status, which provides physiological insight into the interactions between plant, pathogen, and environment.